Operating Instructions; Operating Your Dryer - Electrolux EFDG317TIW Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Your Dryer

WARNING
To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in this Use & Care Guide before operating your dryer.
WARNING
DO NOT operate dryer without lint filter
in place.
STEPS
1. Prepare
• Dry items of similar fabric, weight and con-
load for
struction in the same load.
drying.
• Separate dark items from light-colored
items. Separate items that shed lint from
those that attract lint.
• Check for stains which may not have been
removed in washing. Repeat stain removal
process and wash again before drying. Dryer
heat may permanently set some stains.
• Place delicate, rubber coated, or small items
in a mesh bag (not included).
• Be sure buckles, buttons and trim are heat-
proof and won't damage the drum finish.
Close zippers; fasten hooks and loop fasten-
ers. Tie strings and sashes to prevent snag-
ging and tangling.
2. Check that
the lint filter
is clean
and in
place.
3. Load the
• Load items loosely. The average wet load
dryer and
will fill the drum 1/3 to 1/2 full. Items need
close the
room to tumble freely for even drying and
door.
less wrinkling.
• If desired, place a dryer fabric softener sheet
on top of the load at the beginning of the
cycle.
• When drying large items, dry only two or
three items at a time. Fill out the load with
smaller items.
• For delicate or very small loads, add two or
three similar items to improve tumbling ac-
tion.

Operating Instructions

Clean the lint filter after every load.
TIPS
WARNING
IMPORTANT
DO NOT machine
wash items contain-
ing fiberglass. Small
particles of fiberglass
left in drum may
transfer to fabrics
in other loads and
cause skin irritation
and/or damage to
fabrics.
DO NOT wash water
resistant and water
repellent type cloth-
ing or other materials.
DO NOT operate
dryer without lint filter
in place.
DO NOT overload
the dryer. To save en-
ergy, time and avoid
uneven drying and
wrinkling avoid over-
loading the dryer.
DO NOT over-dry.
Over-drying can
cause wrinkles,
shrinkage, lint, and
a build up of static
electricity.
9

Publicité

Table des Matières
loading

Table des Matières