Repeat; Repeat Title / Chapter; Repeat Track; A-B Repeat - Denon DVD-1200 Mode D'emploi

PLAYING A DISC

Repeat

• The REPEAT button is available only during playback.

REPEAT TITLE / CHAPTER

To activate the repeat function, press the
REPEAT button during playback.
• The repeat mode changes as described below every time
you press the button.
OFF CHAPTER
(repeat off)
(current chapter repeat) (current title repeat)
NOTES:
• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.

REPEAT TRACK

To activate the repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
OFF TRACK
(repeat off)
(current track repeat)
NOTES:
• The REPEAT setting will be cleared when moving to other track.
• Repeat playback does not function during A-B repeat playback.
• Repeat playback is not available when playing the Video CD
with PBC function.
DVD-A
OFF TRACK
(repeat off)
(current track
repeat)

A-B REPEAT

DVD-A
1 Press the A-B REPEAT button
at your
chosen starting point.
• A- appears briefly on the TV
screen.
2 Press the A-B REPEAT button
again at your chosen end point.
• A-B appears briefly on the TV
screen, and the repeat sequence
begins.
3 To exit the sequence, press the
A-B REPEAT button.
DVD-V
TITLE
VCD ( without PBC
CD
Function
ALL
(entire disc repeat)
MP3 JPEG WMA
GROUP ALL
(current folder (entire disc
repeat) repeat)
DVD-V CD VCD
A -
A - B
OFF
NOTES:
• The A-B repeat section can only be set within the current
title (for DVDs), or current track (for audio CDs).
• A-B Repeat is not available with some scenes in DVD.
• To cancel the A point which was set, press the CLEAR button.
• A-B Repeat playback does not function during title, chap-
ter, track or all repeat playback.
Program
You may determine the order in which tracks will play.
1 In stop mode, press the MODE button.
• The PROGRAM screen will appear.
2 Press the cursor buttons
(L or M) to select a track, then
press the ENTER button.
• Press the CLEAR button to erase
the most recently entered pro-
gram.
3 Press the PLAY button to play
the programmed tracks.
NOTES:
)
• While the program is being played back, the STOP button works as
follows.
• Press the STOP button once and then the PLAY button again,
playback will restart from the point where the STOP button
was pressed. (Program continued)
• Press the STOP button twice and then the PLAY button again,
playback will restart from the track in the usual way. (Program
cleared)
• Up to 99 programs can be entered.
• If you wish to repeat the current track in the program, press
the REPEAT button repeatedly until
during playback. If you wish to repeat the entire program
press the REPEAT button repeatedly until
during playback.
• Refer to page 22 for program playback of MP3, WMA, and
JPEG.
1
In stop mode, press the MODE
button twice.
• The group selection screen will
appear.
2 Press the cursor buttons (L or
M) to select a group, then press the ENTER but-
ton.
• The track selection screen will be displayed.
• It takes approximately five seconds until the track
selection screen appears.
Press the cursor buttons (L or M) to select a
3
track, then press the ENTER button.
• Press the RETURN button to go back to the group
selection screen from the track selection screen.
4 Press the PLAY button to play the programmed
tracks.
NOTES:
• It may take time for all the respective track times to be displayed.
• The programmed content is retained until the power is turned
off or the disc tray is opened.
– 19 –
CD
PROGRAM
CD AUD O] TOTAL 0 03 30
1 3 30
1 3 30
2 4 30
3 5 00
4 3 10
5 5 10
6 1 30
7 2 30
1/1
1/2
1 3 30
TRACK appears
ALL appears
DVD-A
PROGRAM
DVD AUDIO TOTAL 0 00 00
1 1 02 25
2 1 03 30
1/1
1/1
1 1 02 25
EN