Stapler Sorter 10 - Olivetti COPIA 9020 Instructions D'emploi

STAPLER SORTER 10 (G back of cover)
Using this feature, the operator can not only produce sets of documents in page order (SORT mode)
or in groups (Group mode), but also staple complete copies produced in Sort mode or with the Sort
mode deactivated.
ATTENTION:
You cannot set the staple mode when copying using the Multi-feeder.
COMPONENTS (G back of cover)
1. Handle
2. Manual staple key
- LED on: press to staple the copies
- LED flashing: indicates a stapler jam
No staples indicator
- Indicator flashing: staples have run out
3. Stapler cover (open to add staples)
4. Copy delivery bins (1-10)
SELECTING THE MODE: SORT
In Sort mode, copies of each original are delivered to different bins, keeping the correct page order.
1. Press the SORT/GROUP/STAPLE-SORT key (A-4) until the
2. Set the number of copies required. (If you set more than 10 copies, the copier will automatically
change the number to 10).
3. Press the PRINT key (A-30).
SELECTING THE MODE: GROUP
In Group mode, all copies of the same original are delivered to the same bin.
1. Press the SORT/GROUP/STAPLE-SORT key (A-4) until the indicator
2. Set the number of copies required.
- If you set too many copies for the bin to contain, the copier automatically corrects the set
number to match the selected bin and then starts copying.
- If more than 10 originals are placed in the feeder tray (e.g. 11, 12, etc.), successive copies
will be delivered to the last bin.
- If more than 10 copies are placed in the tray, divide them into groups of ten (or less) and
copy each set separately.
3. Press the PRINT key (A-30).
chap1.p65 23
indicator lights up.
lights up.
01/02/00, 10.42
23