Sony HandyCam HDR-CX560 Mode D'emploi page 33

Operating the camcorder while playing a movie
You can use the functions shown in the figure below while the camcorder is playing a movie.
The figure below will be displayed when you select [
setting) or [ MOVIE] by touching the Switch Image Type button on the Event Index
screen.
Volume adjustment
Delete
Context
To stop *
Previous
To fast-reverse *
These buttons can be used only when the camcorder is playing a movie.
*

Notes
You may not be able to play back the images with other devices than camcorder.

Tips

Touching the button on the playback screen displays functions you can currently use, and allows you

to use those functions easily.
When playback from the selected image reaches the last image, the screen returns to the INDEX screen.

Touch / during pause to play back movies slowly.

As you repeat touching

about 10 times  about 30 times  about 60 times.
The recording date, time, and shooting conditions , and coordinates (HDR-CX560V/CX700V) are

recorded automatically during recording. This information is not displayed during recording, but you can
display it during playback by touching
Code]  a desired setting 
In the default setting, a protected demonstration movie is pre-recorded.

To adjust the sound volume of movies
While playing back movies, touch
during playback, movies are played as fast as about 5 times 
/
(MENU)  [Setup]  [

.
 adjust with
MOVIE/PHOTO] (the default
Next
To fast-forward *
To pause * /play
(Playback Settings)]  [Data

/ .
US