Sony HandyCam HDR-CX560 Mode D'emploi page 19

4
Set [Daylight Savings] or [Summer Time], then touch [Next].
If you set [Daylight Savings] or [Summer Time] to [On], the clock advances 1 hour.

5
Select the date format, then touch [Next].
6
Select the date and time, touch
[Next] 
The clock starts.

Notes
The date and time does not appear during recording, but they are automatically recorded on the

recording media, and can be displayed during playback. To display the date and time, touch
(MENU)  [Setup]  [
You can turn off the operation beeps by touching

 [Beep]  [Off] 
If the button you touch does not react correctly, calibrate the touch panel.

Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area

ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR-CX560V/CX700V).
.
(Playback Settings)]  [Data Code]  [Date/Time] 
.
/ to set the value, then touch
(MENU)  [Setup]  [
.
(General Settings)]
US
1