NGM FORWARD SHAKE Guide Rapide page 45

CONNECTIVITY: to better use the potentiality provided by the device and its operating
system, you must have an active data connection; data connection of NGM Forward Shake
is ON when you first power on the phone. If it is not included into your mobile phone plan,
data traffic may cause you extra costs, so it is recommended to configure Internet
connection via WiFi. To enable data traffic on one of the SIM cards, select Settings >
Mobile data on/off or activate it from the Quick Setup buttons in the notifications panel.
In Settings > SIM Management > Data connection, you can decide on which SIM activate
data connection.
Connect to the Internet using Wi-Fi®:
activate it, from the main menu choose
indications concerning the use of wireless devices in areas where the use of such functions
is restricted (airplanes, hospitals, etc.). Activate the Flight mode when you have to use only
the functions that do not require Network access.
Connect via Bluetooth®: activate BT in Settings > Bluetooth I/O
Turn on the Bluetooth device you want to connect with. Refer to the device
documentation.
In the contextual menu you will find additional functions and settings.
Choose Search devices. Among the discovered devices, select the device name to
associate with. The phone will attempt to associate with the device, which may be asked
for a pairing code.
you can connect to the WLAN using Wi-Fi option. To
Settings > WiFi I/O. Please follow all warnings and
ENGLISH 45