Internal Blower Installation - Faber STRTIS48WHNB Instructions D'installation

lf you use the internal blower kit, IB600 kit or IB400 kit or IB300, please throw away the
damper (A), the flange (2B) and the cable (E), given with the internal blower kit, shown on
2
Unfasten the 4 screws to dismount the
Box for the blower.
4
The blower can be positioned in four different venting directions as shown.
15

Internal Blower Installation

page 7.
3
Position Internal Blower as shown into the
removed Blower Box. Secure the Internal
Blower in the Blower Box with the two screws
provided with the Internal Blower.