Publicité
Les langues disponibles
Les langues disponibles
1.
Install the spacer so that the grooves on the
spacer fit in the protrusions on the tool barrel while wid-
ening it. Be careful for the spring not to come off from
the slit of spacer.
► 1. Spacer 2. Spring
2.
Install the side grip (optional grip base set and
the grip removed from standard side grip) so that the
groove on the grip fit in the protrusion on the spacer.
Turn the grip clockwise to secure it.
► 1. Side grip
1
2
1
9 ENGLISH
3.
Install the dust cup set so that the claws of the
dust cup fit in in the slits on the spacer.
1
2
► 1. Dust cup 2. Claws
NOTE: If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
► 1. Dust cap
Publicité
