Welding; Welding Parameters; Welding Machine Maintenance - AXXAIR SATO-40E41 Mode D'emploi

INNOVATIVE ORBITAL SOLUTIONS

Welding:

Welding is performed as follows:

Position the tube.

Position and tack weld on the two
elements to be welded.

Align the surfaces to be welded and
the electrode.

Purge the system to evacuate any
oxygen in the hoses and the weld
head (perform this step when using
the machine for the first time or
when the system has not been in
service for a long period of time).

Ensure internal tube inertisation
(refer to the systems recommended
by AXXAIR).

The starting position is "the initial position".

Choose the appropriate welding program.

Welding parameters:

The AXXAIR SAXX series has an automatic welding parameter calculation mode. When choosing the
weld head, you must use SATO-XXXE
Refer to the generator user's manual.

10. Welding machine maintenance:

Prior to each use of the machine, visually inspect the electric/water hose pack. Replace if necessary.

Maintenance operations should be performed by qualified personnel using original
replacement parts.

Before any maintenance operation, disconnect all power sources.

Store and transport the machine, including all accessories, using the original shipping case.

Always keep the machine clean for optimum performance.
Never insert any foreign bodies into the machine rotation system.
Inspect the condition of the rotor contact surface on the horseshoe housing. If needed, clean surfaces
using red Scotchbrite™ pads.
It is important to check the condition of the hoses connecting the weld head to the welding station to
avoid any water or gas leaks.
WARNING:
Only use coolants recommended by axxair. Never add water to the coolant tank because this
may result in chemical reactions that may damage the machine and void the warranty!
Join experience
0
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 27 -
ENGLISH