Inside The Paper Cover - Citizen CT-S251 Mode D'emploi

2.2 Inside the Paper Cover

1. Print head (thermal)
Prints characters and graphic data on paper (paper rolls).
2. Paper near-end (PNE) sensor
Detects when the paper is near the end of the roll. Adjust the position of the sensor
to determine when it detects the end of the paper is near.
3. Button to change paper near-end sensor
Change the position of the paper near-end sensor to match the paper being used.
4. Paper end (PE) sensor
Detects when there is no paper. Printing stops when this sensor detects there is no
paper.
5. Platen
Feeds the paper.
Do not remove the platen except to do maintenance.
6. Auto cutter
Cuts the paper.
1
6
Refer to 3.9 Adjusting the Paper Near-end Sensor
Refer to 5.3 Manual Setting of Memory Switches
21
— —
2, 3
4
5