Wavemaster TWO BT Mode D'emploi page 15

Bluetooth Audio Playback
Activate the Bluetooth (BT /
Switch on TWO by using the volume knob (right knob). Select BT by turning the source selector
BT
(left knob) to point to the BT position.
1. TWO confirms the activation of its Bluetooth function through quick flashing the BT control
BT
LED.
In case an earlier connected BT source is available, TWO
source again. When connected, the BT control LED lights constantly. Now you can start BT
playback through TWO
2. In case no prior connected source is available, after few seconds, TWO
BT sources. This action will be confirmed by slow flashing of the BT control LED.
Now start the Bluetooth search function of your BT souce (e.g. smartphone). After a moment,
you can find "wavemaster TWO
"wavemaster TWO
procedure is finished the TWO
When the BT connection is interrupted through foreign signals interference or by too long
distance, playback will be stopped and the BT control LED shows flashing light. Once the BT
source can be received again, playback continues and the BT control LED lights constant again.
To switch off the Bluetooth function turn back the input selector knob of TWO
position. This will completely deactivate the built-in BT function.
AptX: if your BT source device supports AptX, this sophisticated transmission technology will be
activated iin both devices automatically.
After both devices have achieved a stable BT connection, the activation of the AptX function will
be confirmed by the BT audio source device.
BT source devices without AptX automatically always use the normal BT audio connection.
) function of your audio source (e.g. your smartphone).
.
BT
" in the BT devices list of your BT source. Select
BT
" for pairing. Your BT source will now pair with TWO
BT
BT control LED lights constantly.
BT
English
will instantly connect to that BT
BT
15
will search for new
BT
. Once the pairing
BT
to L1 or L2
BT