Cameo PAR 56 Manuel D'utilisation page 14

RGBA
00 - 99 speed adjustable.
COLOUR FADING MODE
Press the mode button to select Fade mode. The unit will then run in colour fade mode. Press the up and down buttons to select the fade speed from 0-99.
RGBA 15 COLOUR
00 - 99 speed adjustable
AUTO RUNNING MODE
Press the mode button to select Auto mode. The unit will then run automatically through all of the built-in programmes. The run speed can be pre-set
via the speed of the colour change and colour fade modes.
SOUND CONTROL MODE
Press the mode button to select sound mode. The unit will then run via the sound. Press the up and down buttons to adjust the sound sensitivity levels.
RGB
00 - 99 sound sensitivity adjustable
SLAVE MODE
Press the MODE button to enter SLAVE MODE.
Link the slave unit and the master unit via DMX cable. The slave unit will follow in sequence with the master unit.
DMX ADDRESS SETTING MODE
Press the MODE button to enter DMX ADDRESS SETTING MODE.
Press ENTER to access edit mode (the last 3 figures will blink). Use the UP and DOWN buttons to set the DMX address (A001 - A512).
Press ENTER to confirm.
14
7COLOR
00 - 99 speed adjustable.
7COLOR
00 - 99 speed adjustable
7COLOR
00 - 99 sound sensitivity adjustable
STROBE
00 - 99 speed adjustable.
STROBE
00 - 99 speed adjustable