Using The Remote Control; Changing The Air Direction - Haier ESA415N Guide D'utilisation Et D'entretien

USING THE REMOTE CONTROL

TO CLEAR TIMER DELAY PROGRAM:
NOTE: Air conditioner can be either on or off.
Press TIMER until Timer indicator light turns off.
TO SEE OR CHANGE THE REMAINING TIME (IN HOURS):
TIMER OFF:
1. Press the TEMP/TIME up or down arrow button to increase or decrease the time.
2. After 5 seconds, the display on the air conditioner control panel will show will show the
remaining time to Timer Off .
TIMER ON:
1. Display on the air conditioner control panel will show remaining time.
2. Press the TEMP/TIME up or down arrow button to increase or decrease the time.
SLEEP
1. Press the TIMER button to choose Sleep mode. The indicator light will turn on.
2. The temperature will increase by 2˚F 1 hour after the mode is chosen. The temperature then
increases another 2˚F after 1 hour. The unit will hold this temperature for 6 hours then stops.
3. To turn off Sleep mode, press the TIMER button until the indicator light is off.
TEMP/TIME
• Press the TEMP/TIME up arrow button to raise the temperature. Each time you press the TEMP/
TIME up arrow button, the temperature will go up 1°F until it reaches 86°F (30°C).
• Press the TEMP/TIME down arrow button to lower the temperature. Each time you press or
hold the TEMP/TIME down arrow button, the temperature will go down 1°F until it reaches 61°F
(16°C).
Note: In Timer/Sleep mode, temperature cannot be adjusted.

CHANGING THE AIR DIRECTION

4-Way Air Flow: The air directional louvers let
you control the direction of the airflow.
The airflow can be directed up-down
and left to right.(See Fig.20)
PAGE 22
Fig. 20
4-Way Air Flow
USING YOUR AIR CONDITIONER