Final Position - AXXAIR SX122-A Mode D'emploi

INNOVATIVE ORBITAL SOLUTIONS

6.1. Final position:


Clamped tube.

Indexing lever at weld position.

Roller tangentially to the tube + pre-stressed spring.

The electrode axis aimed at the centre of the tube.

H = distance between the tube and the electrode

Positioning the electrode in relation to the welding plane.

HF antenna positioned.
Note: This adjustment is necessary every time the diameter changes.
Join experience
0
Profile track roller
(pre-stressed spring  5mm)
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Electrode
Wheel
Indexing lever
Centering
pin
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 23 -
English
Roller
Adjustment nut