Hf Antenna; Installing The Sliding Head On The Machine - AXXAIR SX122-A Mode D'emploi

INNOVATIVE ORBITAL SOLUTIONS
Note: The welding torch has three slots. Changing the slot makes it possible to vary the distance
between tube and electrode if the travel provided by the adjustment nut is too short.

5.3. HF antenna:

The HF antenna helps the electric arc ignition. If the HF antenna is not well installed, it is possible that the
power supply will not be able to create the electric arc. You have to put the spring on the ceramic nozzle
and to fix the lug on a part linked to the ground. Pay attention that the electric arc does not ignite between
the antenna and a part linked to the electrode.

5.4. Installing the sliding head on the machine:

ATTENTION: Clean the support surfaces well before installing the sliding head on the tool-holding plate.
Thoroughly clean the whole of the tool supporting plate and the whole of the sliding head.
 The sliding head is installed on the tool supporting plate by sliding it into the slot provided for that
purpose.
 The sliding head is positioned by means of two pre-installed plates which ensure that the head
adheres to the support surface of the tool-holding plate.
Join experience
0
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 20 -
English