Connections; Connecting Input/Output Terminals; Front Panel, Rear Panel - PIONEER DJ XDJ-XZ Mode D'emploi

Connections

! Only connect the power cord to a power outlet after you've made all other connections.
Turn off the unit and disconnect the power cord from the outlet before connecting different devices or changing connections.
! Refer to the operating instructions for any devices you want to connect.
! Be sure to use the supplied power cord.
! Connect the unit to your PC/Mac directly using the supplied USB cable.
! Use the shielded LAN cable supplied with the connecting device when you connect to the [LINK (CH3/CH4)] terminal.
! When sharing music files or information using PRO DJ LINK, don't disconnect the LAN cable.
! For more information, refer to the "Operating Instructions" on the Pioneer DJ website.

Connecting input/output terminals

Front panel, rear panel

PC/Mac
DJ
software
Headphones
Front panel Rear panel
1 PHONES output terminals
2 Kensington security slot
3 LINK (EXTENSION) terminal
4 LINK (CH3/CH4) terminals
Power amplifier,
powered speakers etc.
Power amplifier
(for booth monitor etc.),
powered speakers etc.
DJ players
DJ sampler
USB port
5
6 BOOTH output terminals
! Be sure to use the [BOOTH] output terminals for a balanced
output. If they are connected to an unbalanced input (such as
RCA or TS) with a TRS to RCA converter cable, TS cable, etc.,
the sound quality may be lowered or noise may occur.
Turntable
Microphone
Power
cord
(supplied)
To power outlet
Portable audio device
9
En