DeWalt DXCM271 Guide D'utilisation page 17

Service and Adjustments
ALL MAINTENANCE AND REPAIR OPERATIONS NOT LISTED
MUST BE PERFORMED BY TRAINED SERVICE TECHNICIAN.
WARNING: Risk of unsafe operation. Unit cycles
automatically when power is on. When servicing, you may be
exposed to voltage sources, compressed air, or moving parts.
Before servicing unit unplug or disconnect electrical supply to
the air compressor, bleed tank of pressure, and allow the air
compressor to cool.
DXCM271_E110922_27 Gal manual_ENG-FRN-SPN_8382_KM_v12.indd 17
Additional Service
Disassembly or service of the air compressor beyond what is
covered in this manual is not recommended. If additional service
is required, contact your nearest Authorized Warranty Service
Center.
Accessories
Recommended accessories for use with your tool are available for
purchase from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, please call
1-888-895-4549 or visit our website www.dewalt.com.
WARNING: The use of any other accessory not recommended
for use with this tool could be hazardous. Use only accessories
rated equal to or higher than the rating of the air compressor.
Service Information
Please have the following information available for all service calls:
Model Number ____________ Serial Number ___________
Date and Place of Purchase ____________________________
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a D
center, a D WALT authorized service center or other qualified
e
service personnel. Always use identical replacement parts.
17
WALT factory service
e
11/2/17 10:17 AM