Set Alarm Time; Reset Complete Device Back To Factory Settings - TIPTEL 160 Manuel D'utilisation

Set Alarm Time

In off-hook status press and hold
to select the hour. Press
Press to select the minutes. Press
Use / to switch on/off the alarm at any time.
If the alarm is on, a clock-symbol will show up in the lower right corner of the
display. If the alarm time is reached the phone starts ringing with a special melody.

Reset complete device back to factory settings

In on-hook mode, press R for more than 8 seconds. This clears all memory (incl.
Phone Book) and all settings. The device is back to initial factory setting after some
seconds.
Operation
/ for a minimum of 3 seconds. Press
/ to confirm and change to minutes.
/ to confirm. Go on-hook.
17
e
n
g