Pioneer KEH-P1013R Manuel D'installation page 5

Blue/white
To system control terminal
of the power amp (max. 300 mA 12 V DC).
The pin position of the
ISO connector will differ
depends on the type of
vehicle. Connect 6*
and 7* when Pin 5 is an
antenna control type.
In another type of
vehicle, never connect
6* and 7*.
Blue/white (6*)
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Speaker leads
White : Front left +
White/black : Front left ≠
Gray : Front right +
Gray/black
: Front right ≠
Green : Rear left +
Green/black : Rear left ≠
V iolet : Rear right +
V iolet/black : Rear right ≠
Connecting cords
with RCA pin plugs
(sold separately)
System remote control
+
Rear speaker
≠
Perform these connections when using a
different amp (sold separately).
Power amp
(sold separately)
+
Rear speaker
≠
Fig. 2
4