Pioneer KEH-P1013R Manuel D'installation page 4

Connecting the Units
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
1*
3*
5*
Cap (1*)
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
3
Multi-CD player
(sold separately)
2*
Connect leads of the
same color to each
4*
other.
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
IP-BUS cable
Rear output
Antenna jack
IP-BUS input (Blue)
This Product
Fuse