Agilent Technologies TwisTorr 84 FS AG Mode D'emploi page 167

How to connect the input of the controller
The typical connections of the input of the TWISTORR 84 FS AG
Navigator to an external system are described below. Two cases are
considered:
Note that a 24 Vdc, 30 mA voltage, a GROUND signal and the input
pins are available on the connector.
Figure 21
TwisTorr 84 FS AG Navigator Controller User Manual / 87-901-038-01 (A)
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc.
Case 1 external power supply
Technical Information
J1 – IN-OUT
167/192
17