Combustion Airflow Settings; Use; Controls For Use And Settings; Primary Air Control - Wamsler W2-90 Instructions De Montage Et D'utilisation

2.2

Combustion airflow settings

Fuel
Lighting
Firewood
Lignite briquettes
Lignite briquettes
Not in use: do not add any more
fuel
Table 2
3.

Use

3.1

Controls for use and settings

3.1.1

Primary air control

3.1.2

Secondary air control / Airlogic

The settings must always be as shown.
Primary
airflow set-
Nominal heat
load
Nominal heat
load
Long-term
heating
The rate of combustion and therefore the heat delivered by the
stove are determined by the amount of air for combustion air
flowing under the grid. This primary air supply is set using the
performance regulator control.
1 - Closed
2 - Firewood
3 - Lignite
The secondary air regulator is on the inside of the frame, behind
the fire door. Choose the setting for the fuel.
1 - Firewood
2 - Lignite
Start damper
setting
ting
37
Secondary air- Combus-
flow setting tion dura-
tion in hrs
approx. 1
approx. 2
approx. 12
-
-