Combustion Airflow Settings; Use; Controls For Use And Settings; Performance Regulator - Wamsler W1-90 Instructions De Montage Et D'utilisation

2.2

Combustion airflow settings

Fuel
Lighting
Firewood
Lignite briquettes
Lignite briquettes
Not in use: do not add any more
fuel
Table 2
3.

Use

3.1

Controls for use and settings

3.1.1

Performance Regulator

3.1.2

Secondary air control / Airlogic

The settings must always be as shown.
Primary
airflow set-
Nominal heat
load
Nominal heat
load
Long-term
heating
The rate of combustion and therefore the heat delivered by the
stove are determined by the amount of air for combustion air flow-
ing under the grid. This primary air supply is set using the per-
formance regulator control.
1 - Closed
2 - Firewood
3 - Lignite
The secondary air regulator is on the inside of the frame, behind
the fire door. Choose the setting for the fuel.
1 - Firewood
2 - Lignite
Start damper
setting
ting
40
Secondary air- Combus-
flow setting tion dura-
tion in hrs
approx. 1
approx. 2
approx. 12
or
-
-