Laserworld tarm 2.5 Mode D'emploi page 18

Manual: tarm 2.5
Channel
17 Strobe
18 Scan speed
19 Safety zone size
20 Safety zone intensity
21 Color balancing red
(for white balance)
22 Color balancing
green
(for white balance)
23 Color balancing blue
(for white balance)
IMPORTANT: Channels 24 - 34 are reserved for future features and must not be assigned
Important Note:
Operate scanners/galvos only at appropriate speed according to the res-
pective scan angle. Too high scan speed will damage the scanning system.
page 18 / 29
Mode Value
Prof. 0 - 15
16 - 255
Prof. 0 - 15
16 - 255
Prof. 0 - 63
64 - 127
128 - 191
192 - 255
Prof. 0 - 255
Prof. 0 - 255
Prof. 0 - 255
Prof. 0 - 255
Function
None
Increasing strobe effect
Default
Increasing scan speed (from 5 kpps to 40 kpps)
Size of horizontal safety zone
Safety zone is the bottom side
Size of horizontal safety zone
Safety zone is the upper side
Size of vertical safety zone
Safety zone is the left side
Size of vertical safety zone
Safety zone is the right side
From max intensity (0) to no intensity (255)
From max intensity (0) to no intensity (255)
Master to channel 14!
From max intensity (0) to no intensity (255)
Master to channel 15!
From max intensity (0) to no intensity (255)
Master to channel 16!