Electrical Connection - FriFri Basic+ Manuel D'installation Et Mode D'emploi

2.5 Mains fuses
Type 211 / 422
( 422 with two supply cables)
Power 7.5 KW
AC 230V 32.6 A
3AC 230V 18.8 A
3AC 400V 10.8 A
3NAC 400V 10.8 A
3AC 440V 9.9 A
Type
522 (with two supply cables)
Power 7.5 kW
+
11.4 kW
10.8 A
3N ~ 400V
+
16.5 A

2.6 Electrical connection

This appliance must be installed, commissioned and serviced by a qualified person in accordance with national and
local regulations in force in the country of installation. Ensure that the plug/socket is accessible at all times. This
appliance must be earthed.
a) Check that the specifications of the electrical mains correspond to those given on the rating plate. This plate is
located on the control panel inside the door.
b) Means of isolation with at least 3mm contact separation in all poles must be incorporated into the fixed wiring of
this appliance. The fixed wiring insulation must be protected by insulated sleeving having a temperature range of
at least 60 Deg C. Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary
polychloroprene or equivalent elastomer sheathed cord (code 6024-IEC 57).
c) An equipotential bonding terminal is provided to allow cross bonding with other equipment.
d) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
person.
9 KW 11 KW
39.1 A -
22.6 A 27.6 A
13 A 15.8 A
13 A 15.8 A
11.8 A 14.5 A
9 kW 11 kW
+ +
11.4 kW 11.4 kW
13 A 15.8 A
+ +
16.5 A 16.5 A
311
11.4 KW 15 KW
- -
27.6 A 37.65 A
15.8 A 21.7 A
15.8 A 21.7 A
14.5 A 19.7 A
522 (with two supply cables)
7.5 kW 9 kW
+ +
15 kW 15 kW
10.8 A 13 A
+ +
21.7 A 21.7 A
411 / 422
( 422 with one supply cable)
15 KW 18 KW
- -
37.65 A -
21.7 A 26 A
21.7 A 26 A
19.7 A 23.6 A
622 (with two supply
cables)
11 kW
2 x 11.4
+ 2 x 15 kW
kW
15 kW
15.8 A
+ 2 x 16.5 A 2 x 21.7 A
21.7 A
22 KW
-
-
31.6 A
31.6 A
28.9 A