Removing The Grease Filters; Replacing The Carbon Filter; Lighting - ETNA A4345T Mode D'emploi

MAINTENANCE
Grease filters
G
Carbon filter

Lighting

B
C

Removing the grease filters

Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Remove the filters one by one, after
having disconnected the relative fastening elements.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the carbon filters to the motor.
3. Replace the filter grids in the extractor hood.
Note:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• In all cases it is necessary to replace the cartridge at least every
four months.
• DO NOT wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.
Changing the light bulbs A4345T
• Remove the grease filters.
• Replace the bulb with a new max. 28 W bulb.
• Replace the grease filter(s).
Changing the light bulbs A4350T/A4355T
• Remove the glass from the light fitting with a screwdriver (note the
position of the light fitting glass).
• Replace the halogen bulb with a new max. 20 W bulb.
• Replace the glass of the light fitting in its original position.
EN 7