Basic Functions - Yamaha TSX-80 Mode D'emploi

OPERATION
Adjusting the clock
Rear panel Front panel display
flashes.
Alarm setting
This unit can play back iPod/radio and/or beep sound at the set time.
■ Setting the alarm time and sound
Alarm indicator (
and front panel display
flashes.
Rear panel
■ Switching the alarm on/off
4
En

BASIC FUNCTIONS

)
(As required)
1 Set CLOCK to SET.
2 Set the time with TUNING.
3 Set CLOCK to LOCK.
Note
The time settings are lost approximately one
week after unplugging the unit.
1 Press SET.
2 Set the alarm time with
TUNING.
3 Set ALARM TYPE.
• SOURCE+BEEP: selected source
(played back from 3 minutes before
the alarm time) and beep sound
(played back at the alarm time)
• SOURCE: selected source
• BEEP: beep sound only
When you select SOURCE+BEEP or
SOURCE, select:
• iPod: this unit resumes the song you
listened to last time.
• RADIO: this unit plays back the
radio station you listened to last time.
4 Set the alarm volume.
5 Press SET.
Alarm is set and the alarm indicator
( ) lights up.
Note
When iPod is selected as a source, set the iPod
in the iPod dock (☞ P. 2). If iPod is not set at
the alarm time, beep sound is played back.
Switch on/off the alarm function.
When the alarm is on, the alarm
indicator ( ) lights up and alarm
time is displayed for a while.