Hama KEY4ALL X3100 Mode D'emploi page 6

• To do this, fold back the flap of the tablet
case and attach it using the magnet (C).
• Carefully fasten your tablet PC to the
holder using the rubber straps. Choose
the appropriate straps for holding your
tablet PC securely in place.
• To remove the tablet PC, carefully pull
off each of the straps from the corners of
your tablet PC.
6. Operation
Note
• The functions described in this
section are only available for
Bluetooth -capable terminal devices.
®
• Note that the maximum range for
Bluetooth is 10 metres without
®
obstacles such as walls, people, etc.
6.1 Bluetooth pairing
®
Note – Pairing
• Make sure that your
Bluetooth
® -capable terminal device
is on and Bluetooth
• Make sure that your
Bluetooth -capable terminal device
®
is visible for other Bluetooth
devices.
• For more information, please refer
to the operating instructions of your
terminal device.
• Slide the OFF/ON switch (2) to the ON
position to switch on the Bluetooth
keyboard. The power status LED (6)
lights up.
• Press and hold the Connect button (1)
until the Bluetooth
begins to continually flash blue. The
keyboard is searching for a Bluetooth
connection.
• Open the Bluetooth
terminal device and wait until Hama
KEY4ALL X3100 appears in the list of
Bluetooth
® devices found.
is activated.
®
®
®
status LED (4)
®
settings on your
®
5
®