Siemens EQ.9 s700 TI 915 Série Mode D'emploi page 52

en Menu settings
The following settings are available:
Settings
Language
Water hardness
Switch off after
Brightness display
Select usermode
Beverage info
Factory settings
Demo mode
Beverage settings
Espresso / Cof-
fee temperature*
* Temperature at
time of brewing,
can vary when
measured in the
cup
52
Possible settings
Different languages
1 (soft)
■
2 (medium)
■
3 (hard)
■
4 (very hard)
■
Softening device
■
15 minutes
up to
3 hours
Level 1 up to level 10
Standard setting 7
default mode
■
barista mode
■
Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Appliance reset to factory set-
tings
on
■
off
■
88 °C
■
90 °C
■
92 °C
■
94 °C
■
95 °C
■
96 °C
■
Explanation
Setting the language to be used for display texts.
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness cor-
rectly, so that the appliance indicates accurately
when the descaling programme should be run.
If a water softening system is installed in the
house, please select the "Softening device" set-
ting.
Setting that governs how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Setting that governs the brightness of the dis-
play
In the "barista mode" setting, the following can
be performed directly in the display:
The temperature can be set by pressing the
■
left navigation button.
The aromaIntense (brew speed) can be set
■
in three levels by pressing the right naviga-
tion button.
Resets all your own settings to the condition
when delivered.
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Applies only to "default mode" - in "barista
mode" directly adjustable via drink selection.
~ "Adjusting beverage settings" on page 47