AUDIOropa PROLOOP LOSplus Mode D'emploi page 25

Controls and regulators
Loop current adjustment
Amplification adjustment
Metal loss compensation
Indicators
Power supply
Input level
Induction loop current
Overload
Overheat
Loop error
Induction loop monitor
Dimensions
Colour
Weight
This device satisfies the following EU directives:
- 2011/65/EC RoHS directive
- 2002/96/EC WEEE directive
- 2004/108/EC EMC directive
- 2006/95/EC Low voltage directive
Compliance with the directives listed above is confirmed by the CE seal on the device.
CE compliance declarations are available on the Internet at www.audioropa.com
Technical specifications subject to change without notice.
by control dial
for IN 1 and IN 2 by control dial
by control dial
1 green LED
5 green LEDs and 1 yellow LED
5 green LEDs and 1 yellow LED (separately for master and slave)
1 yellow LED (separately for master and slave)
1 red LED (separately for master and slave)
1 red LED (separately for master and slave)
over a 3.5 mm jack for headphone connection
(left audio channel for master, right audio channel for slave)
90 x 430 x 305 mm (H x W x D)
Black
9.5 kg
English 25