Maintenance - Husqvarna TC138 Manuel D'utilisation

Introduction
WARNING:
the safety chapter before you do
maintenance on the product.
Maintenance schedule
Maintenance schedule
Product Do a check of the brake
function.
Do a check of tire pres-
sure.
Do a check of the oper-
ator presence control
(OPC).
Do a check of the re-
verse operation system
(ROS).
Do a check for loose
fasteners.
Examine the blades for
wear and damage.
Lubricate the product.
Lubrication
Refer to
schedule on page 23 .
Do a check of the bat-
tery level.
Clean the battery and
the terminals.
Clean pieces off the
steering plate. Refer to
To clean the product on
page 24 .
Do a check of the trans-
axle cooling fan.
Make sure that the cut-
ting deck is level.
Do a check of the V-
belts.
2
Examine the blades more frequently if you cut where there is sand and soil.
22

Maintenance

Read and understand
Before At inter-
each vals of 8
use hours
X
X
X
X
X
At inter- At inter-
vals of vals of
25 50
hours hours
X
X
2
X
X
X
X
X
X
X
At inter- Each Before
vals of season storage
100
hours
X
X
1706 - 002 - 11.10.2021
X
X
X