i-tec C31DUAL4KHDMI Mode D'emploi page 5

INTRODUCTION
Thank you for purchasing i-tec USB-C Dual HDMI Adapter, which allows you to easily connect up
to two monitors, TVs or projectors with HdMI interface to a laptop, tablet, PC or smartphone with
USB-C or Thunderbolt 3 interface. Max. resolution for two HDMI monitors is 4K@30Hz, for one
HDMI monitor is 4K@30Hz.
Note:
For Apple users: This adapter has the MST function (2 monitors in extended mode), which is not
supported by the operating system Mac OS currently.
For Windows users: MST technology in the Windows OS allows connecting two monitors
simultaneously - in the advanced mode (different content on connected monitors) and in the
mirroring mode (same content on connected monitors). To set up two monitors, setting of the
MST mode in some hardware combinations requires using of both the Windows control utility and
the control panel for the Intel HD Graphics.
PACKAGE CONTENTS
i-tec USB-C Dual HDMI Adapter with cable (30 cm)
ź
Quick Start
ź
SPECIFICATION
1x USB-C connector
ź
Graphic interface: 2x HDMI:
ź
- max. resolution 3840x2160@30Hz when connecting single monitor
- max. resolution 3840x2160@30Hz when connecting two monitors
Mode: Mirror, Extend and Primary display
ź
Supported colours 16 / 32 bit
ź
Power supply from USB-C or Thunderbolt 3 bus; max. 15W
ź
Chipset: STDP4320
ź
OS: Win 10 32/64bit, MacOS X 10.10 and higher, Android, Chrome OS. Requires USB-C or
ź
Thunderbolt 3 bus.
Product dimensions: 70 x 60 x 15 mm
ź
Product weight: 60 g
ź
SYSTEM REQUIEMENTS
Requires a USB-C interface with support for the "DisplayPort Alternate Mode" or Thunderbolt 3
port – now Windows 10 32/64bit, Mac OS X, Chrome OS and Android 6 (Google) with Intel
Broadwell Processors and R51 and higher. Mac OS does not support MST (2 monitors in the
extended mode).
Quick Start
EN
04