Controls - AEG DBE6980HM Manuel D'utilisation

www.aeg.com
6

4. CONTROLS

A
Button Function
A
B
C
D
E
F
G
H
I
L
B C D
Brief pressure: Activates/Deactivates the button pad functions. All
the buttons light up white.
If the motor is ON, it turns the motor off and leaves the button pad
functions active.
If the motor is OFF, the button pad remains active for 1 minute.
Pressed for 3 Seconds
(Motor = Off)
button pad lock. For example to allow cleaning of the Glass without
activating any functions
.
Activates speed one.
Activates speed two.
Activates speed three.
Activates Intensive 1 speed for 10 minutes. At the end of this time
the system will automatically return to the speed set before. It is
disabled by changing speed or pressing button A.
Press and hold for approximately 3 seconds to Enable / Disable the
Activated Charcoal Filter alarm
Activates Intensive 2 speed for 5 minutes. At the end of this time
the system will automatically return to the speed set before. It is
disabled by changing speed or pressing button A.
Activates BREEZE speed for 60 minutes. At the end of this time
the motor switches off. It is disabled by changing speed or pressing
button A.
Filter alarm button.
This button is normal off. It is only displayed when the filter alarm
is triggered. The alarm can be reset by pressing and holding this
button for approximately 3 seconds
H2H indicator button.
This button is normally off. It is only displayed when the hob is
connected to the Hood.
Press briefly: Turns the lighting system on and off at maximum
intensity.
Press and hold to change the lighting intensity up or down.
E F G
: Activates/Deactivates the
(Motor = Off)
.
(Motor = Off)
H I
Display
-
Active: All the buttons flash
Inactive: Buttons remain lit for 1 minute.
The button turns from white to red.
The button turns from white to red.
The button turns from white to red.
The button turns from white to red.
H flashes 5 times
The button turns from white to red.
The button turns from white to red.
Button H fixed: indicates the need to wash
the metal grease filters. The alarm is trigge-
red after the Hood has been in operation
for 40 working hours.
Button H flashing: indicates the need to
change the activated charcoal filters, and
also to wash the metal grease filters. The
alarm is triggered after the Hood has been
in operation for 160 working hours.
The button turns red.
-
-
L