Sony Handycam DCR-PC330E Mode D'emploi page 105

Symptom
The Cassette Memory indicator does
not appear while using a cassette with
Cassette Memory.
The remaining tape indicator is not
displayed.
A cassette label is not recorded.
LCD screen/viewfinder
Symptom
An unknown language appears on the
screen.
An unknown picture appears on the
screen.
An unknown indicator appears on the
screen.
The buttons do not appear on the
touch panel.
The buttons on the touch panel do not
work correctly or do not work at all.
The picture in the viewfinder is not
clear.
The picture in the viewfinder has
disappeared.
Cause and/or Corrective Actions
cClean the gold-plated connector of the cassette. (p. 117)
cSet [
REMAINING] to [ON] on the
to always display the remaining tape indicator. (p. 80)
cUse a cassette with Cassette Memory. (p. 116)
cErase unnecessary titles when the Cassette Memory is full. (p. 75)
cSet the write-protect tab to REC. (p. 116)
Cause and/or Corrective Actions
cSee page 22.
cThe camcorder is in [DEMO MODE]. (The [DEMO MODE] is
automatically displayed when you leave the camcorder for 10 minutes
after selecting CAMERA-TAPE without inserting a cassette or
"Memory Stick.") Touch on the LCD screen or insert a cassette or
"Memory Stick" to cancel [DEMO MODE]. You can also set [DEMO
MODE] to [OFF] on the menu. (p. 72)
cRefer to the indicator list. (p. 133)
cTouch the LCD panel lightly.
cPress DISPLAY/BATT INFO (or DISPLAY on the Remote
Commander). (p. 51)
cAdjust the screen ([CALIBRATION]). (p. 123)
cExtend the viewfinder. (p. 17)
cUse the viewfinder lens adjustment lever to adjust the lens. (p. 17)
cClose the LCD panel. The picture is not displayed in the viewfinder
when the LCD panel is open. (p. 18)
(STANDARD SET) menu
,continued
Troubleshooting
105