Water.filter; Transport; Factory.reset - Siemens TE716 Série Mode D'emploi

de en
j > Water filter
3.sec. +
Before.a.new.water.filter.33.is.used,.it.must.
be.rinsed..
. ● To.do.this,.press.the.water.filter.33.firmly.
into.the.water.tank.11.with.the.aid.of.the.
measuring.spoon.14..Fill.the.water.tank.
with.water.up.to.the."max".mark..
. ● Turn.the.knob.6.to.select.
press.the.start.button.8.
Place 0.5 l container under milk
●
frother start

. ● Place.a.container.with.a.capacity.of.0.5.
litres.under.the.milk.frother.10.
. ● Press.the.start.button.8..Water.will.now.
flow.through.the.filter.33.to.rinse.it.
. ● Next,.empty.the.container..The.appliance.
is.ready.to.use.once.more.
Note: Rinsing.the.filter.33.simultaneously.
activates.the.setting.for.the."change.filter".
display..
You.can.find.detailed.information.about.the.
water.filter.in.the.enclosed.filter.instructions.
The.filter.33.is.no.longer.effective.when.
change filter
the.
at.the.latest.after.2.months..It.needs.to.be.
replaced.for.reasons.of.hygiene.and.so.that.
there.is.no.build­up.of.limescale.(this.could.
damage.the.appliance).
Replacement.filters.can.be.obtained.from.
retailers.(TZ70003).or.from.customer.serv­
ice.(467873)..If.no.new.filter.33.is.used,.turn.
Water filter
the.
40
start
.and.
display.appears,.or.
no
.setting.to. .
Note: If.the.appliance.has.not.been.used.
for.a.prolonged.period.(e.g..vacation).the.fil­
ter.33.should.be.rinsed.before.the.appliance.
is.used.again..To.do.this,.simply.dispense.a.
cup.of.hot.water.
j >
Transport. lock
3.sec. +
. ● To.avoid.damage.from.low.temperatures.
during.transport.and.storage,.the.appli­
ance.must.be.completely.emptied.first.
Information: The.appliance.must.be.ready.
for.use.and.the.water.tank 11.filled.
. ● Press.the.start button.8..The.appliance.
automatically.empties.the.pipe.system.
and.switches.off.
. ● Empty.the.water.tank 11 and.the.drip.tray.
26.
j >
Factory reset
3.sec. +
You.can.cancel.your.own.settings.and.reac­
tivate.the.factory.settings.
. ● To.activate.the.factory.settings,.press.the.
start.button.8.
Note:.The.appliance.can.also.be.reset.to.
the.factory.settings.using.a.combination.of.
buttons..The.appliance.must.be.switched.
off.fully.
<
. ● Hold.down.the.
the.on./.off.switch.1.O / I.at.the.same.time.
for.at.least.5.seconds..Press.the.start.
button.8..The.factory.settings.are.now.
reactivated.
>
.and. .buttons.4.and.