Replacing Fuse - Yamaha F115A Manuel D'utilisation

GB
EMU01330
e

REPLACING FUSE

r
If a fuse has blown, remove the electrical
cover, open the fuse holder and remove
w
the fuse with a fuse puller. Replace it with
a spare one of proper amperage.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
w
hazard.
q
NOTE:
If the new fuse blows again immediately,
t
consult a Yamaha dealer.
1 Electrical cover
2 Fuse holder
000312
3 Fuse
(30A´2, 20A´2)
4 Spare fuse (30A, 20A)
5 Fuse puller
t
000313
4-18