Gyro Sytem - XciteRC Sand Storm one8 2WD Mode D'emploi

EN
positive
camber
negative
camber

Gyro sytem

Switch
-
black
+
red
signal
normal
Switch
reverse
Setting normal
normal
When the rear pulls away, the front
wheels steer automatically in the opposi-
te direction - factory setting!
24
adjust HERE!
adjust HERE!
Servo wire
white
to receiver socket
(channel 1)
Camber:
The tires should always have road contact with all the running
tread. This is achieved with neutral or negative camber (about
2-3 °) on both axes - more negative camber decreases the grip
level again. Ideally, the camber is adjusted so that the tires wear
is evenly.
Positive camber drastically reduces the grip and should, if at
all, only be used on the front axle, to make the cornering less
aggressive.
Servo
Receiver
place here
driving-
direction
Setting reverse
reverse
When the rear pulls away, the front
wheels steer automatically in the same
direction - the car is difficult to control -
not recommended!
Maintenance
Sand Storm one8