Technics OTTAVA SC-C50 Manuel D'utilisation page 14

Basic Network settings
2 Press [ ] to exit the setting.
Note
• Depending on a router, other connected
devices may temporarily lose their connection.
• For details, refer to the operating instructions
of the wireless router.
■
Using the "Google Home" app
"Wi-Fi Setup"
(When using the Chromecast-enabled apps with
this unit)
You can set up a connection using the "Google
Home" app.
1 Start the app and follow the on-
screen instructions.
2 Press [ ] to exit the setting.
Note
• This unit will be displayed as "Technics-
****
SC-C50- " ("Technics-SC-C30-
the device name is not set. ("
characters unique to each set.)
• You can check your network information (SSID,
MAC address and IP address) from the "Google
Home" app or "Technics Audio Center" app.
• Some items on the "Google Home" app are
irrelevant to this unit.
14
(14)
(Continued)
****
") if
****
" stands for
To use Chromecast-enabled apps
When using the Chromecast-enabled apps to
play music on this unit, you need to set up a
network connection using "Google Home" app.
When the network has been set up with another
method, try the setting again with the following
procedure.
1 Press and hold [
[•DIMMER / -INFO] on the rear of this
unit.
• The displayed connection method is
switched every 5 seconds.
2 When "Wi-Fi Setup" is displayed,
release [ ] and [•DIMMER / -INFO].
• "Wi-Fi Setup" starts blinking.
3 Proceed to "Using the "Google
Home" app".
] on the top and