König SAS-DUMMYCAM40 Mode D'emploi page 2

Introduction:
CCTV dummy camera with (fake) auto iris lens. Professional design for the image of security.
With built-in flashing LED. Mounting bracket included.
• We recommend you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Packaging content:
• CCTV dummy camera
• Mounting screws and plugs
• Manual
Specifications:
Housing:
IP protection:
Battery:
Dimensions:
Weight:
Insert the batteries to activate the flashing LED:
1. Remove the battery compartment at the
backside of the camera.
2. Insert 2x AAA 1.5 V batteries into the
battery compartment and correctly match
the polarity markings (+ and -), to activate
the flashing LED.
Close the battery compartment after
inserting the batteries.
plastic
indoor use
2x 1.5 V AAA battery (not included)
155 x 50 x 54 mm (without bracket)
167 g (without batteries)
2
ENGLISH