Settings - AEG FAVORIT 66602 IM0P Notice D'utilisation

30 www.aeg.com
Programme
1) With this programme you have the most efficient use of water and energy consumption for crockery
and cutlery with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) This is the most silent programme. The pump works at a very low speed to decrease the level of noise.
Because of the low speed, the programme duration is long.
5.1 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Degree of soil
Type of load
• Normal soil
5)
• Crockery and cut-
lery
Water
1)
10.2
7 - 14
12.5 - 14.5
12 - 14
10
9 - 10
Programme phases
• Prewash
• Wash 50 °C
• Rinses
• Dry
Energy
(l) (kWh)
0.6 - 1.4
1.4 - 1.6
0.7 - 0.9
1.0 - 1.2
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
Options
• Multitab
Duration
0.932
0.9
(min)
225
40 - 150
154 - 164
75 - 85
30
219 - 229