Astralpool 59124 Manuel D'installation Et D'entretien page 4

6. CONTROL MOTION:
Operating frequency: 868 MHz
Range in the open field: 5 m
Batteries: 2 AAA-1.5 V batteries.
Control Motion has 6 buttons: COLOR, REFRESH, SEQUENCE, SPEED (-/+), ON/OFF
The main functions on the remote control are:
• COLOR: selects one of 12 standard colours available.
• REFRESH: recovers the colour/sequences
• SEQUENCE: selects one of the 8 sequences available.
• SPEED: selects one of the 8 speeds available.
• ON/OFF: switches the lamp/s or spotlight/s ON and OFF.
DO NOT PLACE HAND OVER TOP OF THE BUTTONS ON CONTROL MOTION
7. OPERATION:
Control Motion is able to control lamp/s through the buttons or movement.
In order for a lamp to respond to Control Motion, it must be placed near the lamp/s. If you have more than one lamp,
place it in the middle of them to ensure optimum reception.
7.1 Remote control
- Switching spotlights on
By pressing the ON/OFF button for a few seconds, the spotlights will turn on.
- Selecting colours
The COLOR button enables you to select one of the 12 available colours. Each time the button is pressed, the colour
changes; when the last colour is reached, pressing again goes back to the first colour. The colour selected is displayed
in the Central Display.
COLOUR Nº COLOUR
1
2
3
4
5
6 Magenta
- Selecting sequences
The SEQUENCE button enables you to select one of the 8 available sequences. Each time the button is pressed, the
sequence changes; when the last sequence is reached, pressing again goes back to the first sequence. All sequences
work in cycles; when the last sequence is reached the cycle starts again.
The numbers of the sequences appear on the display numbered from 1 to 8.
SEQUENCE
Estival Red Green
Caroline
Cyan Magenta
Iris
Green Esmerald green
Candy Red Orange
Tropical
Red
Paradise
Red Orange
Abril Pale violet Magenta
Eleven
Red Green
- Refresh button
In pools with more than one lamp, this button is used to synchronise them.
If one of the lamps fails to respond to the COLOR/SEQUENCE commands, press the REFRESH button on the lamp and
the last command will be sent so that it synchronises with the others.
- Selecting the speed of sequences
ATTENTION
Red
Green
Blue
Yellow
Cyan
Blue
Yellow
Cyan Sky-blue
Green Orange
Pink Blue Pink
Green Cyan
Cyan Yellow
Blue Yellow
COLOUR Nº
7
8
9
10
11 Emerald green
12
ORDER OF COLOURS
Blue Pink
White Yellow Cyan
Cyan Magenta Pale
violet
4
REFRESH
CENTRAL DISPLAY
COLOR
SEQUENCE
SPEED -/+
ON/OFF
COLOUR
Sky-blue
Pale violet
Orange
Pink
White
Magenta
Sky-blue Orange Pink Esmerald White
green