DeWalt DXAEC80 Guide D'utilisation page 18

Indications and Faults –
All Charging Modes
LCD Screen Shows:
DXAEC80_DXAEC80CA_ManualENFRSP_082616.indd 18
Indication | Solution:
Temperature Compensation Activated: The " " Icon will appear if the surrounding ambient temperature
is higher than approximately 40°C. The " " Icon will appear if the surrounding ambient temperature is lower
than 0°C. This is not a fault code, but indicates that the unit's temperature compensation feature is operating.
No user action is required.
Overheat Protection Activated: If the charger is overheated, the charging process for the corresponding
charging Bank automatically terminates and the LCD Screen goes directly to the corresponding charging Bank
Indicator. The corresponding Bank Indicator, Fault Icon and the Overheat Alarm Icon flash. The (full) Battery
Icon and Clamp Icons light solid.
Disconnect all battery charger connections and allow the charger to cool for several minutes. Make sure there
is adequate ventilation around the unit before attempting to charge again.
Battery Problem Detected: The charger automatically checks the battery condition 3 minutes after the charging
process starts. If the charger detects a problem with a battery, the charging process for the corresponding
charging Bank automatically terminates and the LCD Screen goes directly to the corresponding charging
Bank Indicator. The corresponding charging Bank Indicator, Fault Icon and the (empty) Battery Icon flash. The
Clamp Icons light solid.
Disconnect the corresponding Bank connections. Have the battery checked by a qualified technician.
Possible Battery Problem Detected: If the battery is not fully charged after 18 hours of continuous charging,
the battery may have internal damage and will not accept a charge. After 18 hours, the charging process for the
corresponding charging Bank automatically terminates and the LCD Screen goes directly to the corresponding
charging Bank Indicator. The Digital Display shows "F04". The corresponding Bank Indicator, Fault Icon and
the (empty) Battery Icon flash.
Disconnect the corresponding Bank connections. Have the battery checked by a qualified technician.
18
10/19/2016 3:58:07 PM