Gaggenau AW 400190 Mode D'emploi Et Notice De Montage page 33

6 Attach the extractor hood.
Adjust the height and align horizontally with the
adjusting screws.
Check that the 4 lower fixing holes have
been correctly marked. If required, mark again.
7 Remove the extractor hood. Drill the 4 lower
8 mm ø fixing holes and press in the wall plugs
flush with the wall.
397
94
min. 600 Elektro
700 Gas
Empfehlung 700
270
160
8 Attach the extractor hood and screw into
position with the remaining 4 screws.
9 Stick protective film over the holes of the 2
lower mounting bolts in the protective grid.
10 Connect up the air outlet pipe.
11 Connect the hood to the electricity supply.
33