Features & Controls; Icon Touch Controls - Zephyr Modena Island Guide D'utilisation, D'entretien Et D'installation

Features & Controls

ICON Touch Controls

Power / Delay Off
1 POWER / DELAY OFF BUTTON
Power Button Function
- Button will turn power on and off for entire hood (fan and lights).
- Hood will remember the last speed and light level it was turned off at.
(Example: Press
Press Button again and the hood will turn back on at speed 4 and high lights
level.)
Delay Off Button Function
- With the fan on press and hold the
to speed 1 and the 5 minute delay off timer will start.
+
accordance with the time remaining until the fan and lights automatically turn
off.
- Pressing Button while Delay Off Function is enabled will turn the hood off and
cancel the Delay Off Function.
ACT™ Verification
- Airflow Control Technology (ACT™) allows the installer to set the maximum fan
CFM to align with local codes and regulations.
- To verify the maximum fan CFM:
- With hood off, hold the
indicators illuminate = default maximum CFM. If four fan speed indicators
illuminate = 390 maximum CFM. If 3 fan speed indicators illuminate = 290
maximum CFM.
2 SPEED SELECTION BUTTON
Fan Speed Decrease Button
- Press this button to decrease fan speed. 5, 4, 3, 2, 1.
- If fan is On Speed 1 and this button is pressed, fan will power Off.
Fan Speed Increase Button
- Press this button to increase fan speed. Fan On, 1, 2, 3, 4, 5.
- If hood is Off and this button is pressed, fan will turn On Speed 1.
ACT™ Enabled Speed Selections
- When ACT™ is enabled, the number of fan speeds will be reduced as follows:
- 390 CFM = Maximum 4 speeds
- 290 CFM = Maximum 3 speeds
24
Adjust 5 Speed Levels
Display (speed level, delay off, filter clean/change)
Button to turn off hood when on fan speed 4 and high lights.
Button for two seconds. The fan will change
LEDs will illuminate and slowly blink in
Button for two seconds. If all five fan speed
Modena Island Use, Care, and Installation Guide
Lights Low/High/Off
C O R E
M O D E N A
I S L A N D