Ogawa OG5500 Manuel D'instruction page 13

10. MANUAL MASSAGE FUNCTION
KNEADING, SWEDISH, TAPPING, SHIATSU, CLAPPING, ROLLING
Press this button to activate the rhythmic kneading manual massage function for a full back massage at medium strength. Every time this
button is pressed, the manual massage function will change in the sequence of "KNEADING > SWEDISH > TAPPING > SHIATSU
> CLAPPING > ROLLING > STOP".
11. FULL AIR
Press this button to activate the air massage function for full body (CALF&FOOT/ARM/SHOULDER). Press this button again to stop the
function.
12/14. WIDTH ADJUSTMENT
The Left/Right Adjustment Button for the width of Tapping, Clapping, Shiatsu and Rolling function
When Tapping, Clapping, Shiatsu or Rolling function is engaged, press on the left or right buttons to change the massage width.
13/15. UPWARD/DOWNWARD ADJUSTMENT
When the spot and partial massage functions are activated, this button can be used to move the massage rollers. Hold this button to
move the massage rollers upward/downward respectively. Release the buttons when reaching desired position.
Note: When the auto program is engaged, it will scan the back length automatically which will set the highest position. The position can
be adjusted by pressing these two buttons.
16. SPOT/PARTIAL
The Spot or Partial Back Massage
Press this button once to activate localized Spot Massage while the original massage mode continues to run at the latest position. Every
single press on this button will change the massage function in the sequence of "SPOT＜PARTIAL＜STOP".
Note: Partial Massage will take the latest position as the center to perform Partial Massage with the distance of approx. 8 cm. SPOT/PARTIAL
button is only effective under the manual massage mode. The Spot Massage cannot be achieved while the Rolling function is activated.
17. MASSAGE DIRECTION 1
2
When the Kneading, Swedish, Tapping, Shiatsu or Clapping massage function is engaged, press this button to change the rhythmic mode
between direction 1 and direction 2.
18. STRENGTH
The Strength Adjustment Button for Manual Function
When manual function is engaged, every single press on this button will change the massage strength and speed interval in the sequence
of "Lv1 > Lv2 > Lv3 > Lv4 > Lv5".
11