Selecting Files; Changing The Playback Speed; Using I/O Loop Playback; Using As An Audio Interface - Teac TASCAM DR-05X Mode D'emploi

Selecting files

1.
Press the MENU button.
The MENU screen will open.
2.
Use the + and − buttons to select BROWSE, and press
7.
The Browse screen will open.
3.
Use the + and − buttons to select a file, and press
/.
The Home screen will reopen.
TIP
Press the 7 button to start playback and return to the
Home screen.

Changing the playback speed

1.
Press the PB CONT button.
The Playback Control screen will open.
2.
Use the + and − buttons to change the playback
speed.
The playback speed can be adjusted in a range from
50% (0.5) to 200% (2.0).

Using I/O loop playback

Use this function to repeat playback between two set points
(IN and OUT).
1.
Press the PB CONT button.
The Playback Control screen will open.
2.
Press the 7 button to start playback.
3.
Press the MARK button to set the IN (starting) point.
4.
Press the MARK button to set the OUT (ending)
point.
When the OUT point is set, I/O loop playback will start.
TIP
During I/O loop playback, press the MENU button to
end I/O loop playback while retaining the set IN and OUT
points.
5.
Press the MARK button to clear the IN and OUT
points.

Using as an audio interface

By connecting this unit to a computer (Windows/Mac) or iOS
device, you can use it as an audio interface.

Preparation

1.
Use a USB cable to connect the unit to a computer,
and turn the unit on.
micro-B USB
PC
USB
The USB CONNECT screen will open.
NOTE
An Apple Lightning-USB camera adapter is necessary to
connect the unit to an iOS device
2.
Use the + and − buttons to select AUDIO I/F, and
press 7.
The AUDIO I/F screen will open.
TASCAM DR-05X
11