STERWINS 20 VHT2-50.1 Notice De Montage, Utilisation Et Entretien page 253

FR 7.2 STORE THE LITHIUM BATTERIES
Illustration 6.1
ES
Please make sure that the battery power level is as recommended in the battery instruction manual.
Please refer to the battery instruction manual for further details.
PT
8. MAINTENANCE
IT
EL
PL
8.1 CLEANING
Illustration 5.1 to 5.4
RU
Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
KZ damage, and may cause a shock hazard.
8.2 CLEANING THE BLADE
UA
Illustration 5.2 and 5.4
RO
BR
EN
similarly qualifi ed specialist!
Keep the blade 2 clean and free of debris.
Remove trimmings.
Apply a small amount of suitable lubricant on the blade 2 to retain a good cutting performance.
Keep the blade 2 sharp. Have a worn or damaged cutting device replaced with a new one of the same
type by a qualifi ed specialist.
DANGER! Risk of injury due to electric shock.
Remove the battery pack before adjusting, inspecting,
cleaning or storing the product.
WARNING! Wear safety gloves when working on the cutting
device and close to it! Use appropriate tools to remove debris,
e.g. a brush or wooden stick! Never use your bare hands! The
replacement of the cutting device should be done by a
qualifi ed specialist! Rework or sharpening blades is not
recommended unless it is done by a repair service or a
254