STERWINS 20 VHT2-50.1 Notice De Montage, Utilisation Et Entretien page 245

FR • Maintain power tools. Check for misalignment or binding of moving parts,
breakageof parts and any other condition that may aff ect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
ES
are caused by poorly maintained powertools.
PT
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
IT
• Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
EL
performed. Use of the power tool for operations diff erent from those intended could
result in a hazardous situation.
PL
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the
RU
tool in unexpected situations.
2.8 BATTERY TOOL USE AND CARE
KZ
• Recharge only with the charger specifi ed by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fi re when used with another
UA
battery pack.
• Use power tools only with specifi cally designated battery packs. Use of any
RO
other battery packs may create a risk of injury and fi re.
• When battery pack is not in use, keep it away from other metal objects, like
BR
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
EN
together may cause burns or a fi re.
• Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, fl ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause irritation or
burns.
• Do not use a battery pack or tool that is damaged or modifi ed. Damaged or
modifi ed batteries may exhibit unpredictable behaviour resulting in fi re, explosion or risk
of injury.
• Do not expose a battery pack or tool to fi re or excessive temperature. Exposure
to fi re or temperature above 130 °c may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specifi ed in the instructions. Charging improperly
or at temperatures outside the specifi ed range may damage the battery and increase the
risk offi re.
246