Switching On The Device For The First Time; Standby Menu; Settings Menu - Sonoro STEREO SO-310 Mode D'emploi

8.1 Switching on the device for the first
time
After you have switched the device on for the first
time, the LC display shows the clock display and the
[Tune to FM RDS station to set time & date] message.
i
In FM/DAB mode, the time and date are set auto‐
matically unless this function has been disabled.
8.2

Standby menu

The following settings can be configured in the
Standby menu:
n Setting the time manually.
n Setting the date manually.
n Switch the date on the display on/off.
The procedure to set the individual functions is the
same.
Setting the time manually
Fig. 10: Setting the time manually
1. In Standby mode, press the [MENU] button on
the device or the remote control.
ð The display shows the [Set Time] menu
(Fig. 10).
2. Press the click wheel to set the hours.
ð The hour display will flash.
3. Turn the click wheel to set the hours.
4. Press the click wheel to confirm the setting.
ð The minute display will flash.
5. Turn the click wheel to set the minutes.
6. Press the click wheel to confirm the setting.
ð The time is set.
i
Use the [Next] and [Previous] buttons to
toggle between the hours and minutes
display.
i
After 10 seconds of inactivity, the device automat‐
ically switches to Standby mode without saving
the settings.
Setting the date manually
Fig. 11: Setting the date
1. In Standby mode, press the [MENU] button on
the device or the remote control.
ð The display shows the [Set Time] menu
(Fig. 10).
2. Turn the click wheel until [Set Date] is shown.
3. Press the click wheel.
ð Now you can set the date by rotating the
click wheel.
i
You can switch between the day, month
and year display by pressing the click
wheel.
Switching the date on/off
Fig. 12: Switching the date on/off
1. In Standby mode, press the [MENU] button on
the device or the remote control.
ð The display shows the [Set Time] menu
(Fig. 10).
2. Turn the click wheel until [Display Date] is
shown.
3. Press the click wheel.
ð Now you can switch the date on or off.
8.3

Settings menu

In operating mode, the following configurations can
be made in the [Settings] menu:
87