Setting The Volume; Setting Playback To Mute; Radio Playback; Fm Radio - Sonoro STEREO SO-310 Mode D'emploi

Masquer les pouces Voir aussi pour STEREO SO-310:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 107
2.
Press the [MODE] button on the front of the
device until the desired mode is shown, or select
it on the remote control.
i
Alternatively, you can also turn the click
wheel after pressing the [MODE] button to
toggle through the different modes. Press the
click wheel to confirm the mode.
ð The selected mode is displayed (Fig. 29).
10.2

Setting the volume

Fig. 30: Setting the volume
1.
Turn the click wheel to increase or decrease the
volume (Fig. 30).
ð A volume control is shown in the display.
10.3

Setting playback to mute

Mute
Fig. 31: Mute
1.
In playback mode, briefly press the [MUTE]
button on the remote control to mute the sound
during playback.
ð The display will show the text [Volume Mute]
(Fig. 31).
Switching the sound back on
2.
To switch the sound on again, press the [MUTE]
button on the remote control again or turn the
click wheel clock-wise.
11

Radio playback

1.
Press the [MODE] button on the front of the
device until FM or DAB mode is shown, or select
the respective mode on the remote control.
ð The display will show the [FM Radio] or
[DAB Radio] symbol.
The display shows the following information in radio
mode:
n Mode: FM Radio or DAB Radio.
n Stored program channel, if the radio station is
stored in the program memory.
n Station name, if the station transmits RDS text.
n RDS text transmitted by the station, if the station
transmits RDS text.
i
RDS is only available for stations in the FM fre‐
quency range and only if the corresponding sta‐
tion transmits RDS data.
If the station does not broadcast RDS text, then the
frequency is displayed instead of the station name.
11.1

FM radio

11.1.1

Searching an FM station

Automatic tuning
Condition:
The DAB/FM antenna is connected.
Fig. 32: Automatic tuning
1.
In FM playback mode, press and hold the [Next]
or [Prevoius] button to activate the automatic
tuning function.
ð The display shows the [Auto Tuning] text
(Fig. 32).
Manual tuning
Condition:
The DAB/FM antenna is connected.
Fig. 33: Manual tuning
1.
Press and hold the click wheel to activate
manual tuning.
ð The display shows the [Manual Tune] text
(Fig. 33).
2.
Turn the click wheel to change the frequency
range.
3.
Press the click wheel to confirm your selection.
93

Publicité

Table des Matières
loading

Table des Matières